Gas Powered Air Compressor/Generators
Overview
The VMAC G30 air compressor/generator combines two convenient forms of power into a single, innovative system. Operators with a G30 air compressor/generator on their service truck can quickly switch between air and AC power for their tools and equipment.
Applications – Common jobs that use the compressor:
- Light/medium duty mobile mechanics
- Mobile tire service technicians
- Light duty contractors
Commonly used tools & equipment:
- Air Tools
- ¾” impact wrenches (up to 1” with a small receiver tank)
- Backfill tampers
- Chipping hammers
- Die grinders
- 2” horizontal grinders
- Tire inflation
- Electric Equipment
- Power tools
- Night work lights
- Battery chargers
- Personal electronics
Benefits
25 CFM CONTINUOUS AIR POWER
VMAC’s G30 air compressor/generator includes a patented 25 CFM rotary screw air compressor designed to maintain max CFM 100% of the time, so operators don’t have to wait for their air compressor to fill up a large air receiver tank. This maximizes air tool performance while providing maximum operator efficiency at the job site and eliminating downtime.
3600 W CONTINUOUS AC GENERATOR
The G30 air compressor/generator is engineered and manufactured for mobile power. The 3600 W continuous AC output generator includes a 120V circuit with a GFCI duplex receptacle and a 240V circuit with a L14-20 twist lock. Operators will be able to power their electric tools, lighting, and other equipment wherever needed.
TURNKEY SYSTEM WITH EASY INSTALLATION
The G30 air compressor/generator is easy to install and ready for same-day use. The system includes all the necessary accessories, including a battery, electric starter, and lifting hook; simply add fuel and get straight to work.
TWO OPERATING MODES
VMAC’s air compressor/generator features a high idle and auto idle setting, ensuring the system’s optimal performance for every task. A simple throttle control valve makes it easy to switch between high idle mode for generator use and auto idle mode for air on demand.
40% SMALLER & 36% LIGHTER
VMAC G30 air compressor/generators are engineered and manufactured for mobile applications. The G30 is 40% smaller and 36% lighter than other gas powered air compressor/generator combos on the market today.
Components
ENGINE THROTTLE CONTROL
Manual throttle control valve for Compressor Mode (Auto Idle) and Generator Mode (High Idle)
FUEL SUPPLY
Manual choke, fuel on/off
HONDA GX390 ENGINE
Air-cooled 4-stroke OHV with electric start; CARB and EPA certified; Honda 3-Year Warranty
BATTERY
ACDelco 12V, 300 CCA, 360 CA
ELECTRONIC KEY SWITCH
Electric start; hour meter
ENGINE OIL DRAIN
UNLOADER
Unloads compressor for generator operation; decreases engine load, lowers sound levels, reduces fuel use and engine wear
VMAC AIR COMPRESSOR
Oil-injected rotary screw; 25 CFM @ 100 psi; 100% duty cycle (compressor only); up to 150 psi
AC GENERATOR
Single-phase brushed synchronous 2 pole generator with electronic automatic voltage regulation (AVR); 3600 W continuous output (generator only)
VMAC WHASP TANK
Integrated oil/air separator and air/oil cooler (patented)
VMAC BELT-DRIVE SYSTEM
Gearless, clutchless, auto-tensioned serpentine belt, steel belt-guard
FUEL TANK
1.6-Gallons (6.1 L)
LIFTING POINTS
OPTIONAL ACCESSORIES
REMOTE CONTROL PANEL
A500244
Remote control panel with a 10-foot extension for key switch, hour meter, choke, unloader, and throttle control valve.
COLD CLIMATE KIT*
A500044
Heats up the G30 on the way to the jobsite, recommended in below freezing temperatures. *800W Power Inverter required
800 W POWER INVERTER
A500181
800 W, 12 V power inverter; required to power the VMAC G30 gas driven air compressor cold climate kit.
6-GALLON AIR RECEIVER TANK
A300045
Remote-mounted 6-gallon air receiver wing tank; includes fittings; 170 psi max.
10-GALLON AIR RECEIVER TANK
A300047
Remote-mounted 10-gallon air receiver tank with mounting feet; includes fittings, valves, gauge, and tank drain; 200 psi max.
Specifications
-
Air Compressor Output
25 CFM @ 100 psi (150 psi max)
-
Air Compressor
Belt-driven, 100% duty cycle, VMAC oil-injected rotary screw
-
Generator Output
3600 W continuous AC output
1 x 20A, 120V, 60Hz single-phase circuit with GFCI duplex receptacle
1 x 20A, 240V, 60Hz single-phase circuit with L14-20 twist lock -
Generator
Single-phase brushed synchronous 2 pole generator with electronic automatic voltage regulation (AVR); helps protect sensitive electronics
-
Engine
Honda GX390 air-cooled 4-stroke OHV with electric start; CARB and EPA certified; Honda approved application
-
Weight (wet)
Approx. 295 lb (134 kg)
-
Dimensions
42.8” (l) x 21.4” (w) x 23.9” (h); 108.7 cm (l) x 54.4 cm (w) x 60.7 cm (h)
-
Mounting Plate
40.5” (l) x 19.125” (w) / 102.9 cm (l) x 48.6 cm (w)
-
Decibels (dB) @ 20 feet (6.1 meters)
67 – 81 dB
-
Fuel Tank Capacity
1.6-Gallons (6.1 litres)
-
Battery (included)
ACDelco 12V, 300 CCA, 360 CA
-
Control System
- 2-speed throttle control with manual valve for Compressor Mode (Auto Idle) and Generator Mode (High Idle)
- Compressor mode for compressor operation responds to air demand
- Generator mode for generator operation at high idle
- Electronic key switch with hour meter
- Unloader unloads compressor for generator operation; decreases engine load, lowers sound levels, reduces fuel use and engine wear
- 2-speed throttle control with manual valve for Compressor Mode (Auto Idle) and Generator Mode (High Idle)
-
Safety Features
Air Compressor
- Compressor thermal protection circuit
- Automatic rapid blow-down valve on tank
- 200 psi pressure relief valve
- Low engine oil pressure shutoff
Generator
- 20 amp thermal breaker 120 Volt circuit
- 20 amp thermal breaker 240 Volt circuit
- 120 Volt GFCI duplex receptacle